General Pump YFL7SWITCH Flow Switch, 5100 psi, 250V, 3/8"

The General Pump YFL7SWITCH is a 3/8" Flow Switch. This model has an operating Pressure of 5,100 and a maximum pressure of 5,650. It has a maximum flow of 8.0 gpm and temperature rating of 180°F. The maximum volts is 250V and the maximum amps is 1 amp. Port Sizes: Inlet, 3/8" M-NPT; Discharge, 3/8" M-NPT. Materials include Plastic, Brass, Buna-N, and Stainless Steel. Installation: Install the valve away from heat or magnetic sources as they may affect its operation. Do not store or handle on full metal structures, do not test the magnetic strength of the piston or magnetizable material. This valve uses a permanent magnet. It is advisable to flush the system before installing and operating the unit the first time, so that any possible residual metal scraps in the piping system will be expelled. The electric probe has a stamped marking at the end near the exit of the cable that indicates its position in relation to the brass body, this allows for the correct assembly of the bulb "reed"; in case of removal or repair, follow this mark because the wrong positioning could damage the probe.

• Operating Pressure: 5100 psi
• Maximum flow: 8.0 gpm
• Temperature: 180°F
• Maximum Volts: 240V
• Maximum Amps: 1 amp